ADVERTISEMENT
Step-by-Step Instructions:
Step 1: Thorough Cleaning and Initial Sanding (Moving Horizontally)
Clean the hazy headlight with warm soapy water.
Rinse thoroughly with clear water and let dry.
Use masking tape to protect the paint around the headlights.
Soak sandpaper sheets in water for a few minutes.
Start with 1000-grit sandpaper. Sand in horizontal strokes using gentle pressure.
The water will turn cloudy—this means you’re removing the damaged layer.
Step 2: Progressive Sanding (Changing Direction)
Rinse the lens with clean water.
Switch to 1500-grit sandpaper. Sand in vertical strokes this time.
Continue using finer grits (finishing with 2500 grit), rinsing between each step.
Each pass should reduce scratches and smooth the surface further.
Step 3: Applying and Buffing the Polish
Wash the lens with cool water and let it dry completely.
Wet one corner of your flannel cloth and apply a small amount of polish.
Use forceful, circular motions to polish the lens until smooth and clear.
Watch the clarity begin to return as you work.
Step 4: Final Polish and Inspection
Let the polish dry fully.
Use a clean, dry section of the cloth to buff away any residue in circular motions.
If small cloudy spots remain, reapply polish to those areas and buff again.
Inspect your work—the lens should appear completely clear!
Final Thoughts:
By following this process, you can save money and refresh the look and functionality of your headlights. Not only will your car look newer, but your visibility and safety on the road will also be greatly improved.
ADVERTISEMENT
